Mac SMART Utility 3.2.6

SMART Utility for Mac

SMART Utility for Mac 是掃描硬盤驅動器的硬件診斷系統的應用程序。 SMART（自我監測，分析和報告技術）是一種由製造商內置到硬盤中的系統，用於報告硬盤操作的各種測量（稱為屬性）。這些屬性可用於檢測硬盤驅動器是否有機械或電氣故障，並可指示硬盤驅動器何時發生故障。 SMART Utility 可以讀取和顯示這些屬性。這允許有時間來備份，然後更換驅動器。 SMART Utility for Mac 還允許運行內置自檢的驅動器，這也可以指示驅動器上的故障.

SMART 實用程序與其他驅動器實用程序（如磁盤實用程序）不同，後者只讀取總體 SMART 狀態。 SMART Utility 不僅顯示各個屬性以查看其狀態和信息，還會使用基於這些屬性的內部算法來檢測驅動器在 SMART 指示失敗之前發生故障。在 SMART 確定驅動器發生故障之前，此故障前檢測可以保存寶貴的數據。而且，雖然原始信息可以通過 smartmontools（這是 SMART Utility 所基於的）在命令行上查看，但 SMART Utility 以易於閱讀的格式顯示，以及運行其內部預失敗算法。另外，
顯示所有支持的內部驅動器及其分區以及一些外部驅動器（如果安裝了可選的 SAT SMART 驅動程序）在主窗口中顯示重要信息，如驅動器型號，容量，開機時間，溫度，壞扇區計數，錯誤計數和類型顯示容易閱讀整體智能狀態與顏色編碼文本在單獨的窗口中顯示更詳細的信息，包括功能，所有可用的屬性和過去五個錯誤使用 Growl 通知服務（如果已安裝）和電子郵件通知（如果已配置）顯示信息在菜單欄 Sup 中顯示信息端口在後台掃描支持運行硬盤驅動器的內置測試，並顯示測試結果支持掃描 OS X 軟件 RAID 驅動器，以及許多 RAID 機箱和卡（包括 SeriTek 驅動器）中的驅動器支持全部日誌記錄信息到日誌文件以驗證 SMART 數據支持自定義故障前算法，包括僅警告新的壞扇區和錯誤計數支持保存驅動器報告以備以後查看支持打印驅動器報告支持 HDD 和 SSD 支持 Mac OS X 10.9 至 10.11 完全本地化法語，謝謝 Ronald A. Leroux 注：30 天或 5 次發布試用版。需要 64 位處理器.

SMART Utility for MacDownload AppStore
軟體資訊
檔案版本 Mac SMART Utility 3.2.6
檔案名稱 smartutility326.zip
檔案大小 7.5 MB
系統 Mac OS X 10.9 or later
軟體類型 Volitans Software
官網 https://www.volitans-software.com/apps/smart-utility/
更新日期 2020-05-10
更新日誌

What's new in this version:

SMART Utility 3.2.6
- Enabled notarization
- Disabled “Buy” options until new purchasing system is ready
- Fixed a bug where outputting debug messages preferences would not properly change state
- Fixed a couple interface bugs with the French translation
- Fixed some formatting issues with Help
- Updated to Sparkle 1.23


SMART Utility 3.2.5
- Enabled Hardened Runtime for better security
- Fixed bug where SMART Utility would display Time Machine snapshot volume
- Fixed bug where SMART Utility would display duplicate boot drives
- Fixed random crash on first launch
- Removed Growl support for notifications
- Updated to smartctl 7.0 which supports many more drives - Updated to Sparkle 1.21.3


SMART Utility 3.2.4
- Added support for NVMe drives in newer Macs
- Fixed crash on first install of SAT SMART Driver
- Updated to Sparkle 1.18.1
- Updated to smarctl 6.6 which supports many more drives


SMART Utility 3.2.3
- Added ability to use installed version of smartctl, which fixes an unknown status error in that case
- Fixed bug where drives with zero partitions would display incorrectly
- Fixed bug where running a test would cause a crash
- Fixed bug on 10.12 where Configure Email button would not enable properly
- Fixed a couple of small bugs which could potentially cause a crash
- Updated to smarctl 6.5 which supports many more drives


SMART Utility 3.2.2
- Added support for Blink1 USB alert light notifications
- Changed displayed drive name to model, if available
- Fixed bug that would cause negative values for some raw attributes
- Fixed bug where temperature min/max would not be recognized for some drives
- Fixed bug that caused crash for failing drives
- Fixed bug that showed duplicates for RAID and CoreStorage drives
- Fixed bug that would not send email upon test completion
- Removed in app purchasing and sent to website instead
- Updated ATS settings for better security
- Updated SAT SMART Driver to version .10 to add more support for external drives
- Signed SAT SMART Driver to allow installation on 10.11


SMART Utility 3.2.1
- Updated to Sparkle 1.11 for updating, which provides better support and reliability
- Fixed signing issue on 10.11
- Fixed error when checking for updates


SMART Utility 3.2
- Converted Menu Extra to use modern APIs
- Changed email sending to use TLSv1 or higher for security
- Fixed bug where Menu Extra status wouldn’t be tracked
- Fixed bug where Send Feedback and Crash Report would not actually send anything
- Updated code to modern Objective-C
- Updated to smarctl 6.4 which supports many more drives
- Dropped support for 10.5, 10.6, 10.7, and 10.8

Screenshot